Siheyuan: Give me incredible understanding but not knowledge

With the production in Factory No. 9, the sound of clanging did not stop.

But most of them were thrown into the discard box because the accuracy did not meet the requirements.

Lin Jiajun ignored this matter. Instead, he sat in the factory and took out the books he carried and continued reading.

As for Yi Zhonghai, who is responsible for monitoring the collinear production, he often goes to various places to verify the discarded parts.

Let’s see if it’s possible to modify it after the fitters come, but the final inspection results show that these masters’ measurements were very accurate.

There was no possibility of modification, and Yi Zhonghai slowly stopped looking at the abandoned Lin Jiajun.

The sunlight outside the factory slowly tilted through the glass in the center of Factory No. 9, and the sun set little by little.

The originally blazing sunshine began to slowly turn towards orange.

Yi Zhonghai looked at the changes in the sunlight, and then looked at the watch in his hand.

The original production target of one hundred parts set by Lin Jiajun has only been completed to eleven, and these are all accurate.

"It's almost time for Jiajun to get off work!"

Yi Zhonghai took out his watch and showed it to Lin Jiajun. Lin Jiajun nodded and then said to Yi Zhonghai.

"Your uncle, please put the qualified parts in this box in the future. It is best to wrap it with some newspapers to avoid subsequent collisions that will lead to a decrease in accuracy."

After hearing this, Yi Zhonghai nodded and agreed.

And he also started to notify the masters who were making parts that it was almost time to stop. The time had come.

When the three masters heard Yi Zhonghai's words, they stopped the machine tool and came to the finished parts to take a look.

Suddenly the three masters frowned, and then the three returned to their respective boxes of discarded parts and went to check it out.

Several apprentices only knew that they were useless and followed the master.

Listening to their mutterings and watching them frown, this situation is really rare.

After all, they are all eighth-level workers, so their skills are definitely useless.

It's just the original accuracy of the lathe that limits them.

Then after going through various processes, the scrap rate becomes higher and higher.

"Um……"

"My problem, I will adjust it tomorrow!"

Master Qiu saw that he had the most damage here, and he was silent for a moment before speaking.

The other two nodded and then spoke.

"Tomorrow we really need to think about how to do better."

At this moment, Lin Jiajun also stood up, packed his things, and said to several people.

"This is all expected. If we rely solely on machine tools for production, our current accuracy requirements are indeed a bit high, so Director Yang will dispatch a few level 8 fitters to come over tomorrow. It should be easier in the future!"

"Today is just a trial production, don't be discouraged!"

Lin Jiajun said with a smile. In fact, he had no expectations in his heart. He could only say that as a leader, he cannot convey negative emotions now.

Once negative emotions spread, I'm afraid the yield rate will become even lower and we don't know when it will be produced!

The books he is reading now are design drawings related to milling machines and grinders. Originally, according to his idea, he could first improve the accuracy of lathes and rely on fitters to produce a batch of qualified lathes.

But at present, it seems that without milling machines and grinders, it may not be as difficult as usual.

As for ultra-precision processing equipment, even if it is imported, it is currently impossible to open some time for them to use.

The three masters nodded after hearing this, and at this moment, the sound of jingling bicycles could be heard outside Factory Building No. 9.

"Get off work first! Have a good rest!"

After speaking, Lin Jiajun turned around and left Factory Building No. 9, heading outside.

Yi Zhonghai began to pack up the finished parts, but there was no newspaper yet, so he could only space the parts a little wider.

Prevent them from colliding. If the parts are damaged due to collision, it is really unnecessary loss!

Arriving outside, Lin Jiajun followed the overgrown path to the outside.

Fang Qi was riding a bicycle under the sunset, smiled at Lin Jiajun, and then waved.

Lin Jiajun walked over and Fang Qi asked with a smile.

"Did the delivery go smoothly today?"

"It's not going very well, but we have produced some finished products. It should be better if Uncle Yang sends the fitter over tomorrow."

"Go back first!"

"Ok!"

Under the orange sunset, the bicycle walked towards the outside of the factory.

At this time, most of the people in the factory had already left. When they arrived below the office building, Shazhu and Xu Damao seemed to have been waiting here for a while.

Several people walked together...

When he returned home, Qin Huairu was almost ready. He Yuyu moved a small stool and sat at the door.

Seeing Silly Zhu and the others coming back, they ran inside.

"Sister-in-law, my brother and the others are back."

After seeing several people come back, Qin Huairu waited for them to sit down before speaking to them.

"Hu Dahua came here just now and said that she and Jia Dongxu will get married the day after tomorrow, so we should go there then."

"I just saw that you guys haven't come back yet, so I said I would come back later! I thought she had a good attitude, so I agreed."

Qin Huairu spoke to Shazhu, and Shazhu nodded. He originally wanted to ask about this matter when he got home, but he was delayed by some things later, so he couldn't ask!

"Hu Dahua probably still doesn't know what Jia Dongxu was arguing with Silly Zhu about Sister Qin. Otherwise, he probably wouldn't be able to marry Jia Dongxu so smoothly now. He shouldn't be making trouble with Jia Dongxu! Haha!"

Xu Damao said with a smile, while Qin Huairu said to Xu Damao helplessly.

"Da Mao, please pay more attention to things like this in the future. Others are getting married, so don't talk about this kind of topic all the time to avoid misunderstanding!"

"It's Damao, be careful what you say!"

Qin Huairu and Shazhu didn't care much about this topic, because they could be said to be the winners, so it didn't matter that much.

But what they didn't notice at this moment was that Hu Dahua, who had just seen their group returning at the door, came to the door and heard about this and went back silently.

She couldn't tell how she felt at the moment, but she just felt a little uncomfortable that such an important matter was hidden so well by the Jia family.

It's not about Jia Dongxu's previous love for Qin Huairu, it's just this kind of concealment. Anyway, Hu Dahua can't accept concealment.

Speak out anything openly and solve it if it can be solved, as long as Jia Dongxu doesn't still like Qin Huairu.

Anyway, Qin Huairu is also Shazhu's wife, but Jia Dongxu's concealment made Hu Dahua think that maybe Jia Dongxu is still thinking about Qin Huairu.

So he turned around and headed towards Jia's house. When he came to the door, Jia Zhang saw Hu Dahua coming back.

"You're back so soon? Did you agree with them?"

Hu Dahua didn't pay attention at all, but walked inside.

He frowned, and when he saw Jia Dongxu, he asked Jia Dongxu.

"Jia Dongxu, are you hiding something from me?"

"Is there something that you haven't explained to me clearly? If you tell me now, I can pretend that nothing has happened."

"We got married smoothly, but if you want to hide it from me now, I'm afraid this marriage won't be so easy!"

9300, okay, still not enough per day